Transfer case bearing Kit (ITC DD295, ITC PLA, DCD)

Common symptoms include a humming or grinding noise coming from the center of the vehicle, which often changes pitch with speed. You might also experience vibrations or a shuddering sensation during acceleration as the bearings lose their ability to support the shafts and balance torque correctly.

This kit is specifically designed for transfer cases using the ITC DD295, ITC PLA, and DCD systems. These are frequently found in various Land Rover models and Mercedes-Benz vehicles equipped with DCD Offroad systems. Always verify your specific transfer case model code before ordering.

These bearings provide critical support for the internal shafts. By reducing friction and maintaining precise alignment, they ensure that torque is balanced and transmitted smoothly from the transmission to the front and rear axles.

Yes, replacing transfer case bearings typically requires a bearing press, snap ring pliers, and specific torque wrenches. Because the transfer case must be disassembled, we recommend professional installation to ensure the internal tolerances are set correctly.

It is highly recommended to use the full kit. If one bearing has worn out, the others have likely been subjected to the same stress and debris. Replacing the entire set prevents future teardowns and ensures a much longer service life for your transfer case.