{"id":420350,"date":"2021-11-17T15:05:06","date_gmt":"2021-11-17T14:05:06","guid":{"rendered":"https:\/\/transfercasepartshop.com\/uncategorized\/transfer-case-bearing-kitatc13-1\/"},"modified":"2026-03-23T09:46:11","modified_gmt":"2026-03-23T08:46:11","slug":"transfer-case-bearing-kitatc13-1","status":"publish","type":"product","link":"https:\/\/transfercasepartshop.com\/en\/bmw-en-2\/atc13-1-en-2\/transfer-case-bearing-kitatc13-1\/","title":{"rendered":"Transfer case bearing Kit (ATC13-1)"},"content":{"rendered":"

These bearings found in the transfer case provide support for the shafts and balance the transmission of the appropriate torque.<\/p>\n

\nWhat are the symptoms of worn bearings in my BMW ATC13-1 transfer case?<\/summary>\n

Common symptoms include a persistent grinding or humming noise coming from under the vehicle, especially during acceleration. You might also experience vibrations or a “shuddering” sensation during low-speed turns, which indicates the shafts aren’t being supported correctly by the bearings.<\/p>\n<\/details>\n

\nWhy is my BMW jerking during acceleration? Could it be these bearings?<\/summary>\n

Yes, it is very likely. If the ATC13-1 bearings are worn, they allow for excessive play in the shafts. This disrupts the balance of torque transmission, leading to jerky movements or hesitations as the xDrive system struggles to distribute power efficiently.<\/p>\n<\/details>\n

\nWill this ATC13-1 kit fit my BMW G-series model?<\/summary>\n

The ATC13-1 transfer case is typically found in modern BMW G-series platforms, including various 3, 5, 7 series, and X-series models. However, because BMW uses different units based on engine torque, you should always verify the ID tag on your transfer case housing before ordering.<\/p>\n<\/details>\n

\nCan I replace just the bearings, or do I need a whole new transfer case?<\/summary>\n

In many cases, a bearing kit is a much more cost-effective solution than a full unit replacement. If the internal gears and the clutch pack are still in good condition, replacing the bearings will restore the unit’s stability and eliminate noise at a fraction of the cost.<\/p>\n<\/details>\n

\nIs this a complete kit for a full transfer case rebuild?<\/summary>\n

This kit focuses on the critical bearings that support the shafts and balance torque. While it addresses the most common mechanical wear points, a “full” rebuild might also require new oil seals and specific transfer case fluid (DTF-1) to ensure long-term reliability.<\/p>\n<\/details>\n